Skip to main content
Canna~Fangled Abstracts

Spent Material Extractives from Hemp Hydrodistillation as an Underexplored Source of Antimicrobial Cannabinoids

By June 16, 2024July 2nd, 2024No Comments

 2024 Jun; 13(6): 485.
Published online 2024 May 24. doi: 10.3390/antibiotics13060485
PMCID: PMC11201062
PMID: 38927152
Simon Vlad Luca, Conceptualization, Methodology, Software, Validation, Formal analysis, Investigation, Resources, Data curation, Writing – original draft, Visualization, Supervision, Project administration,1,* Krzysztof Wojtanowski, Methodology, Software, Writing – review & editing,2 Izabela Korona-Głowniak, Software, Investigation, Writing – review & editing,3 Krystyna Skalicka-Woźniak, Resources, Writing – review & editing, Funding acquisition,4 Mirjana Minceva, Resources, Writing – review & editing, Funding acquisition,1 and Adriana Trifan, Methodology, Validation, Writing – review & editing5,*
Marc Maresca, Academic Editor, Violeta Popovici, Academic Editor, Emma Adriana Ozon, Academic Editor, Andreea Letitia Arsene, Academic Editor, and Verginica Schroder, Academic Editor
Author information Article notes Copyright and License information PMC Disclaimer

Associated Data

Data Availability Statement

Abstract

Hemp (Cannabis sativa L.) has been used for millennia as a rich source of food and fibers, whereas hemp flowers have only recently gained an increased market interest due to the presence of cannabinoids and volatile terpenes. Currently, the hemp flower processing industry predominantly focuses on either cannabinoid or terpene extraction. In an attempt to maximize the valorization of hemp flowers, the current study aimed to evaluate the phytochemical composition and antimicrobial properties of several extracts obtained from post-distillation by-products (e.g., spent material, residual distillation water) in comparison to the essential oil and total extract obtained from unprocessed hemp flowers. A terpene analysis of the essential oil revealed 14 monoterpenes and 35 sesquiterpenes. The cannabinoid profiling of extracts showed seven acidic precursors and 14 neutral derivatives, with cannabidiol (CBD) reaching the highest concentration (up to 16 wt.%) in the spent material extract. The antimicrobial assessment of hemp EO, cannabinoid-containing extracts, and single compounds (i.e., CBD, cannabigerol, cannabinol, and cannabichromene) against a panel of 20 microbial strains demonstrated significant inhibitory activities against Gram-positive bacteria, Helicobacter pylori, and Trichophyton species. In conclusion, this work suggests promising opportunities to use cannabinoid-rich materials from hemp flower processing in functional foods, cosmetics, and pharmaceuticals with antimicrobial properties.

Keywords: Cannabis sativa L., cannabidiol, CBD, essential oil, by-products, terpenes, antimicrobial, fatty acids

1. Introduction

Hemp (Cannabis sativa L., Cannabaceae) has served for over 6000 years as a versatile resource for food, fibers, oils, medicines, and recreational or religious activities []. Throughout the Middle Ages, hemp became a vital fiber crop for the production of textiles and ropes []. However, following the discovery of the central nervous system (CNS)-intoxicating effects of Δ9-tetrahydrocannabinol (Δ9-THC), an important constituent in its flowers, hemp cultivation has decreased over the 20th century []. Nevertheless, at the beginning of the 2000s, controlled genotypes (containing less than 0.2–0.3% Δ9-THC) were re-authorized to be marketed for agricultural purposes in the European Union []. Consequently, more than 60 cultivars have been registered since []. Thanks to the wide application of its derivatives, hemp cultivation has ramped up in the last few decades; for instance, fibers and hurds are used for the textile, paper, construction, and automotive industries; biomass is used for the production of biofuels (biodiesel, bioethanol, biogas); and lastly, the oils derived from seeds are regarded as food, cosmetic ingredients, or animal feed [,]. Nevertheless, from the global perspective of a sustainable circular economy, more attention has been recently paid to utilizing agro-industrial waste within the hemp production chain, with particular emphasis on the flowers. Hemp flowers/inflorescences are valuable sources of high-adding value compounds, in particular cannabinoids and volatile terpenes.

Cannabinoids are a class of terpeno-phenolics encompassing more than 150 members. These constituents are biosynthesized in the secretory cells of glandular trichomes, primarily concentrated in unfertilized female flowers []. Unlike Δ9-THC, cannabidiol (CBD) lacks CNS-intoxicating properties and has antiemetic, anti-inflammatory, antioxidant, antimicrobial, and neuromodulatory effects. CBD is currently under clinical evaluation for the treatment of 26 medical conditions and has already been granted orphan drug status for 11 other diseases []. Additionally, the Food and Drug Administration and the European Medicines Agency have approved Epidiolex®/Epidyolex® as the first CBD-based medication for adjunctive therapy in treating seizures linked to Dravet and Lennox-Gastaut syndromes []. As compared to CBD, other cannabinoids, such as cannabigerol (CBG), cannabidivarin (CBDV), cannabinol (CBN), or cannabichromene (CBC), are regarded as minor constituents since they are present in significantly lower amounts in hemp flowers. Preliminary pharmacological investigations have shown promising therapeutic attributes for some of the minor cannabinoids, such as antimicrobial, anti-inflammatory, neuroprotective, anticonvulsant, antiemetic, anti-psoriatic, anticancer, anti-melanogenic, or antidepressant effects [,,,,].

Besides cannabinoids, volatile terpenes are another class of constituents secreted in the trichomes of female hemp flowers []. More than 90 terpenes have been reported in hemp, formally grouped into monoterpenes (e.g., α-pinene, β-pinene, β-myrcene, limonene) and sesquiterpenes (e.g., β-caryophyllene, α-humulene, β-caryophyllene oxide) []. These compounds generally confer a mild, light floral fragrance to the hemp flowers, allowing them to be used in perfumery or cosmetics. In addition, hemp terpenes were shown to exert interesting pharmacological properties, such as insecticidal, neuromodulatory, antimicrobial, anticancer, or anti-inflammatory effects [,,]. Thus, niche products, such as hemp essential oils (EO), usually isolated by steam distillation or hydrodistillation, are currently available on the market []. However, in light of the low EO yields achieved from hemp flowers, the residual (spent) plant material remaining at the end of steam or hydrodistillation is considerably high (up to 99.7 wt.%). In addition, a diverse array of other post-distillation by-products are generated, such as aqueous condensates (hydrolates, hydrosols) and distillation waters (residual waters, leachates). Since there is no information concerning the further use of these materials, it can be assumed that they are simply regarded as waste and disposed of in the environment, similar to other waste stream products from the aroma and EO industry [].

In an attempt to find uses for the above-mentioned by-products that could arise from hemp flower hydrodistillation, this study evaluated the phytochemical profile and antimicrobial activity of several post-distillation extracts in comparison to the essential oil and total extract obtained from unprocessed hemp flowers. Besides our ongoing multi-team research efforts to find novel naturally derived chemotherapeutic agents for further use in treating human infections, our interest in screening hemp’s antibacterial and antifungal properties has also been motivated by several preliminary reports that scarcely explored the inhibitory properties of hemp extracts and purified cannabinoids against Gram-positive bacteria, yeasts, and certain Gram-negative bacteria [,,,,,,]. Thus, this work aimed to obtain a hydrodistilled hemp flower essential oil and use the remaining by-products (e.g., spent material, residual distillation water) as an underexplored source of cannabinoids for a further assessment of their antibacterial and antifungal properties.

2. Results and Discussion

In this study, the essential oil from hemp flowers obtained by hydrodistillation (HEO) was analyzed by gas chromatography coupled with mass spectrometry (GC–MS). In parallel, the residual water used for hydrodistillation was concentrated (HWE), whereas the processed hemp flowers (spent material after hydrodistillation) were extracted with hexane (HSE). For comparison purposes, the unprocessed hemp flowers were also extracted under the same conditions (HTE) (Table 1). The fatty acid composition of the solvent extracts was analyzed by GC–MS, whereas the cannabinoid profile was assessed qualitatively by liquid chromatography hyphenated with high-resolution tandem mass spectrometry (LC-HRMS/MS) and quantitatively by liquid chromatography coupled with diode array detection (LC-DAD). Subsequently, the antimicrobial activity of hemp essential oil, cannabinoid-containing extracts, and individual cannabinoids (i.e., CBD, CBG, CBN, and CBC) was tested against a panel of 20 microbial strains.

Table 1

Extraction yields of hemp essential oil and extracts.

Extract Code Unit Yield
Hemp flower essential oil HEO mL/100 g 0.7 ± 0.1 a
Total (unprocessed) hemp flower extract HTE g/100 g 7.3 ± 0.3 b
Spent (processed) hemp flower extract HSE 8.2 ± 0.4 c
Hydrodistillation water extract HWE 6.4 ± 0.2 d

Data are reported as mean ± SD of three experiments; different letters within columns indicate significant differences (p < 0.05).

2.1. Terpene Profile of Hemp Essential Oil

According to the obtained terpene profile data (Table 2), sesquiterpenes in HEO accounted for 85.94 ± 0.63% of the total peaks, with almost an equal distribution between oxygenated and non-oxygenated (hydrocarbon) sesquiterpenes. (E)-β-Caryophyllene (Figure 1) was the dominant compound in HEO (17.17 ± 0.24%), followed by β-caryophyllene oxide (8.22 ± 0.13%), α-bisabolol (8.20 ± 0.12%), α-humulene (6.12 ± 0.53%), β-eudesmol (5.79 ± 0.05%), and β-bisabolene (5.14 ± 0.05%). From the group of monoterpenes, α-pinene and β-myrcene are worth mentioning, even though their relative amounts were only 2.80 ± 0.04% and 1.09 ± 0.02%, respectively (Table 2).

An external file that holds a picture, illustration, etc. Object name is antibiotics-13-00485-g001.jpg

Structures of main terpenes identified in the hemp essential oil.

Table 2

Terpene profile of hemp essential oil.

No. Compound LRI a LRI b Relative Abundance (%) c
1 α-Pinene 936 936 2.80 ± 0.04
2 β-Pinene 980 978 0.73 ± 0.00
3 β-Myrcene * 989 989 1.09 ± 0.02
4 Limonene * 1032 1033 0.24 ± 0.00
5 Eugenol 1035 1034 0.41 ± 0.01
6 Linalool * 1099 1103 0.55 ± 0.01
7 Fenchyl alcohol 1124 1117 0.32 ± 0.01
8 cis–p-Menth-2-en-1-ol 1131 1121 0.24 ± 0.00
9 trans–p-Menth-2-en-1-ol 1140 1140 0.32 ± 0.01
10 Camphor 1150 1148 0.12 ± 0.00
11 Borneol 1178 1177 0.24 ± 0.01
12 Terpinen-4-ol 1185 1180 0.13 ± 0.01
13 p-Cymen-8-ol 1199 1185 0.49 ± 0.02
14 α-Terpineol 1198 1198 0.46 ± 0.05
15 Copaene 1376 1378 0.20 ± 0.01
16 (Z)-β-Caryophyllene 1414 1409 0.20 ± 0.01
17 γ-Elemene 1418 1430 0.33 ± 0.01
18 (E)-β-Caryophyllene * 1431 1428 17.17 ± 0.24
19 α-Bergamotene 1438 1435 1.87 ± 0.03
20 allo-Aromadendrene 1443 1444 0.49 ± 0.01
21 (E)-β-Farnesene 1453 1456 1.59 ± 0.03
22 α-Humulene * 1467 1458 6.12 ± 0.53
23 γ-Muurolene 1472 1476 0.25 ± 0.02
24 α-Guaiene 1482 1499 0.34 ± 0.06
25 Selina-4(14),7(11)-diene 1485 1497 0.60 ± 0.08
26 β-Selinene 1495 1486 0.80 ± 0.03
27 α-Selinene 1501 1497 2.85 ± 0.01
28 β-Bisabolene 1511 1509 5.14 ± 0.05
29 δ-Cadinene 1520 1519 0.73 ± 0.02
30 γ-Patchoulene 1525 1522 0.47 ± 0.01
31 β-Sesquiphellandrene 1530 1525 1.06 ± 0.03
32 α-Cadinene 1544 1530 1.48 ± 0.03
33 Selina-3,7(11)-diene 1549 1542 0.76 ± 0.02
34 Selina-4(15),7(11)-diene 1554 1532 0.38 ± 0.01
35 Germancrene B 1563 1157 1.48 ± 0.03
36 (E)-Nerolidol 1568 1560 0.15 ± 0.01
37 Spathulenol 1575 1573 0.42 ± 0.02
38 β-Caryophyllene oxide * 1597 1581 8.22 ± 0.13
39 Aromadendrene oxide 1606 1650 2.87 ± 0.04
40 cis-(Z)-α-Bisabolene epoxide 1613 1619 0.85 ± 0.01
41 Humulene epoxide 1619 1610 0.41 ± 0.02
42 Cubenol 1625 1614 2.70 ± 0.04
43 γ-Eudesmol 1638 1642 4.02 ± 0.06
44 Caryophylla-4(12),8(13)-dien-5α-ol 1648 1640 2.29 ± 0.02
45 Caryophylla-4(12),8(13)-dien-5β-ol 1651 1634 1.70 ± 0.08
46 α-Cadinol 1657 1647 0.53 ± 0.03
47 β-Eudesmol 1670 1651 5.79 ± 0.05
48 epi–α-Bisabolol 1677 1682 3.49 ± 0.07
49 α-Bisabolol * 1692 1685 8.20 ± 0.12
50 Cannabidiol * – – 1.75 ± 0.03
Total 95.82 ± 1.35
Hydrocarbon monoterpenes 4.86 ± 0.02
Oxygenated monoterpenes 3.33 ± 0.10
Hydrocarbon sesquiterpenes 44.33 ± 0.62
Oxygenated sesquiterpenes 41.61 ± 0.64

a Linear retention index on ZB-5MS column; b Linear retention indices on ZB-5MS column or equivalent columns according to the NIST library (webbook.nist.gov, accessed on 2 February 2024); c Expressed as the mean percentage area extracted from the GC–MS chromatograms of three repeated analyses; in bold are the major terpenes; * confirmed by standard.

Our data are consistent with those reported in a previous work, when β-caryophyllene, α-humulene, β-caryophyllene oxide, and β-eudesmol were found in relative amounts of 16.20 ± 0.96%, 6.51 ± 0.45%, 6.39 ± 0.53%, and 5.20 ± 0.26%, respectively []. In another study, Pieracci et al. [] showed that hemp EOs obtained from 10 different genotypes of C. sativa were characterized by a predominance of oxygenated sesquiterpenes ranging from 30.90 ± 7.02% to 60.90 ± 2.48%, with β-caryophyllene, α-humulene, β-caryophyllene oxide, and humulene epoxide as the typical constituents. Menghini et al. [] reported the presence of β-caryophyllene (19.3%), α-humulene (8.3%), and β-caryophyllene oxide (4.3%) in an EO obtained from C. sativa cv. Futura 75; in addition, the same group of authors also noticed higher relative amounts of monoterpenes, such as α-pinene (14.9%), β-myrcene (11.8%), and β-pinene (3.8%), than in our study. Furthermore, Zheljazkow et al. [] claimed that the concentrations of the main hemp terpenes in cultivated and wild hemp ascensions varied between 11.0–29.6% for β-caryophyllene, 4.4–11.9% for α-humulene, 0.2–31.2% for β-caryophyllene oxide, and 1.2–9.5% for humulene epoxide.

2.2. Cannabinoid Profile of Hemp Extracts

According to the extraction yields (Table 1), the processed plant material gave a yield of extraction higher than the unprocessed one. This could be related to the fact that the water used for the hydrodistillation extracted many polar components from the initial hemp flowers. Therefore, the same dried mass of processed hemp flowers contains more hydrophobic components (easily extracted with hexane) than the same mass of the initial hemp flowers []. The cannabinoid profile of HWE, HSE, and HTE was assessed by LC—HRMS/MS. Due to the lack of standards, the identity of the cannabinoids was tentatively annotated according to previously developed methodologies [,,,]. For instance, the discrimination between CBD-, THC-, and CBC-type acidic cannabinoids was already presented by Piccolella et al. [] for 20 different compounds identified in hemp pollen samples from Italy. Borille et al. [] proposed the annotation of around 70 different cannabinoids from 68 Brazilian samples of Cannabis spp. (leaves, stems, and flowers). In addition, Berman et al. [] performed the comprehensive metabolic profiling of 36 samples of Cannabis plants from Israel, identifying 94 cannabinoids belonging to 10 distinct subclasses. Barhdadi et al. [] identified and quantified 17 cannabinoids in 20 CBD-based e-cigarette liquids from the Belgium market.

According to the above-mentioned literature records and standard injections, 21 compounds were putatively identified in HWE, HSE, and HTE (Table 3, Figure 2). Based on the obtained data (Table 3), there were no essential qualitative differences between the extracts, i.e., most peaks were detected in all samples. The annotated cannabinoids can be grouped into two categories: acidic and neutral cannabinoids. With few exceptions, the acidic precursors and the corresponding decarboxylated derivatives were both present in the extracts; e.g., cannabielsoic acid (CBEA, 2) + cannabielsoin (CBE, 10); cannabinodiolic acid (CBNDA, 3) + cannabinodiol (CBND, 7); cannabitriolic acid (CBTA, 4) + cannabitriol (CBT, 6); cannabidivarinic acid (CBDVA, 5) + CBDV (9); tetrahydrocannabinolic acid (Δ9-THCA, 11) + Δ9-THC (18); cannabicoumaronic acid (13) + cannabicoumarone (19); cannabidiolic acid (CBDA, 14) + CBD (15). On the other hand, the neutral form of cannabichromanonic acid (1) was not present, while the acidic precursors from epoxycannabigerol (8), hydroxycannabinol (12), CBN (16), dehydrocannabifuran (17), cannabicyclol (CBL, 20), and CBC (21) were not identified.

An external file that holds a picture, illustration, etc. Object name is antibiotics-13-00485-g002.jpg

Chemical structures of cannabinoids identified in the hemp extracts.

Table 3

Cannabinoid profile of hemp extracts.

No Proposed Identity TR (min) HRMS (m/z) MF HRMS/MS (m/z) Sample Ref.
1 Cannabichromanonic acid 4.1 377.1974 C21H28O6 301.1463, 283.1369, 273.1480, 255.1386, 245.1524 HTE, HSE []
2 Cannabielsoic acid 5.2 375.2153 C22H30O5 357.2051, 339.1941, 297.1521, 275.1269, 245.1509, 233.1140, 219.0995, 207.1004 HTE, HSE, HWE [,]
3 Cannabinodiolic acid 5.9 355.1892 C22H26O4 323.1605, 313.1776, 299.1625, 273.1465, 253.0850, 239.1048, 225.0896, 211.0977, 197.0944, 187.0741 HTE, HSE, HWE [,,]
4 Cannabitriolic acid 7.0 391.2091 C22H30O6 301.1454, 283.1310, 273.1460, 255.1353, 245.1510, 235.0933, 217.0834 HTE, HSE, HWE []
5 Cannabidivarinic acid * 8.2 331.1893 C20H26O4 313,1781, 295.0933, 273.1487, 255.1346, 215.1534, 193.1198, 173.0941, 145.0996, 141.0894 HTE, HSE, HWE [,,]
6 Cannabitriol 10.2 347.2195 C21H30O4 291.1574, 271.1515, 245.1521, 231.1353, 217.1195, 207.1053, 201.0889, 193.1195 HTE, HSE, HWE [,]
7 Cannabinodiol 11.6 311.1995 C21H26O2 281.1500, 231.1358, 225.0907, 217, 1210, 213.0901, 199.0744, 193.1200, 173.0945, 165.0893, 145.0978 HTE, HSE, HWE [,]
8 Epoxycannabigerol 12.7 333.2339 C21H32O3 273.1846, 259.1678, 247.1653, 193.1203, 177.1216, 135.1143, 123.0422 HTE, HSE, HWE [,]
9 Cannabidivarin * 13.9 287.2002 C19H26O2 231.1375, 219.136, 203.1074, 189.0911, 179.059, 165.0907, 123.0439 HTE, HSE, HWE [,,]
10 Cannabielsoin 15.3 331.2249 C21H30O3 271.1670, 231.1360, 193.1204, 135.0426, 109.1000 HTE, HSE, HWE [,,]
11 Δ9/Δ8-Tetrahydrocannabinolic acid 16.5 345.2059 C21H28O4 327.1949, 297.1498, 285.1515, 268.1521, 229.0866, 211.0762, 197.0623 HTE, HSE, HWE [,,,]
12 Hydroxycannabinol 18.2 327.1978 C21H26O3 313.2111, 287.1663, 271.1692, 259.1686, 247.1362, 231.1355, 211.0768, 201.0899, 193.1208 HTE, HSE, HWE []
13 Cannabicoumaronic acid 20.6 373.1988 C22H28O5 299.1685, 273.1462, 233.1158, 193.1122, 183.0999, 147.0787, 127.0376 HTE, HSE []
14 Cannabidiolic acid * 21.5 359.2201 C22H30O4 341.2096, 299.1638, 285.1469, 273.1474, 261.1467, 233.1159, 219.1001 HTE, HSE, HWE [,,]
15 Cannabidiol * 22.6 315.2311 C21H30O2 273.1825, 259.1677, 247.1676, 231.1373, 217.1209, 207.21363, 193.1209, 177.1189, 165.0901, 151.0744, 137.0588, 135.1155, 123.0424, 107.0844 HTE, HSE, HWE [,,,]
16 Cannabinol * 26.1 311.2001 C21H26O2 273.1866, 259.1670, 241.1544, 231.1374, 217.1217, 193.1213, 135.1154, 123.0433, 107.0848 HTE, HSE, HWE [,,,]
17 Dehydrocannabifuran 29.7 309.1829 C21H24O2 294.1607, 281.1576, 253.1205, 238.0974, 235.1106, 225.1198 HTE, HSE [,]
18 Δ9/Δ8-Tetrahydrocannabinol * 32.2 315.2304 C21H30O2 273.1844, 259.1680, 247.1673, 231.1377, 217.125, 207.1355, 193.1211, 135.1158, 123.0433, 107.847 HTE, HSE, HWE [,,,]
19 Cannabicoumaronone 33.3 329.2095 C21H28O3 287.1522, 273.1444, 259.1655, 247.1320, 229.0827, 209.1138, 153.0543 HTE, HSE []
20 Cannabicyclol * 38.1 315.2308 C21H30O2 273.1792, 259.1681, 247.1697, 233.1519, 217.1224, 207.1359, 193.1208, 177.1217, 135.1160, 123.0431 HTE, HSE, HWE [,,]
21 Cannabichromene * 39.1 315.2316 C21H30O2 259.1659, 247.1670, 231.1372, 217.1351, 193.1193, 177.1175, 165.0884, 151.0731, 135.1141, 123.0420 HTE, HSE [,,]

* confirmed by standard.

2.3. Cannabinoid Composition of Hemp Extracts

The quantification of cannabinoids (also referred to as ‘cannabinoid potency’) is an important step in assessing the quality of a hemp flower-derived product. According to the results presented in Table 4, CBD was the major cannabinoid in all extracts (up to 15.93 ± 0.02 wt.%). Compared to HTE, HSE displayed CBD levels around two times higher, while the CBD concentration in the residual water extract HWE was ten times lower. This tendency could be correlated to the lipophilic character of the cannabinoids, conferring them a low extractability in water and high extractability in organic solvents. Interestingly, the acidic precursor CBDA was found in significant amounts in the unprocessed flower extracts HTE but in very low levels in the spent material extracts (Table 4). This could indicate a thermal conversion of CBDA to CBD during hydrodistillation due to exposing CBDA to a high temperature (~100 °C) for a long time (3 h). The remaining cannabinoids (e.g., CBDV, CBG, CBC, CBN, etc.) were found in concentrations between 0.01 to 0.55 wt.% (Table 4).

Table 4

Cannabinoid concentration of the hemp flower extracts.

Sample HTE HSE HWE
Cannabinoid wt.%
Cannabidivarinic acid – – –
Cannabidivarin 0.35 ± 0.01 a 0.21 ± 0.05 b 0.02 ± 0.00 c
Cannabidiolic acid 1.11 ± 0.01 a 0.06 ± 00 b 0.01 ± 0.00 c
Cannabigerolic acid – – –
Cannabigerol 0.07 ± 0.00 a 0.38 ± 0.00 b 0.01 ± 0.00 c
Cannabidiol 7.02 ± 0.02 a 15.93 ± 0.02 b 0.76 ± 0.00 c
Tetrahydrocannabivarin 0.11 ± 0.00 a 0.02 ± 0.00 b –
Cannabinol 0.54 ± 0.02 a 0.55 ± 0.01 a 0.04 ± 0.00 b
Δ9-Tetrahydrocannabinol 0.25 ± 0.02 a 0.29 ± 0.01 b 0.01 ± 0.00 c
Δ8-Tetrahydrocannabinol 0.23 ± 0.01 a 0.02 ± 0.00 b –
Cannabicyclol 0.02 ± 0.00 a 0.06 ± 0.00 b 0.01 ± 0.00 c
Cannabichromene 0.02 ± 0.00 a 0.02 ± 0.00 a –
Δ9-Tetrahydrocannabinolic acid 0.03 ± 0.00 a 0.02 ± 0.00 b –

Data are expressed as mean ± SD of three repeated analyses; sample codes as in Table 1; different letters within rows indicate significant differences (p < 0.05).

Our data are comparable with previous studies reporting on the cannabinoid concentration of various hemp extracts. For example, the concentrations of CBD, CBC, CBG, CBN, and CBL in methanol hemp flower extracts were 2.50 ± 0.10, 0.33 ± 0.12, 0.13 ± 0.01, 0.02 ± 0.00, and 0.02 ± 0.00 wt.%, respectively []. Muscara et al. [] reported the presence of CBD, CBDA, cannabigerolic acid, CBN, and Δ9-THCA in amounts of 23.51 ± 0.05, 14.65 ± 0.01, 0.29 ± 0.01, 0.36 ± 0.01, 0.23 ± 0.01, and 0.03 ± 0.01 wt.%, respectively, in a hemp flower hexane extract.

2.4. Fatty Acid Composition of Hemp Extracts

Even though hemp flower extracts are known to contain lipids, their fatty acid composition is usually neglected. In all samples (Table 5), linoleic acid (C18:2) and linolenic acid (C18:3) were found in the highest amounts (up to 1.75 ± 0.07 wt.%). Significant concentrations of palmitic (C16:0) and arachidic acid (C20:1) were also noticed. Concerning its high polarity, the residual water extract HWE contained 15–50 times lower quantities of fatty acids than the solvent extracts. Generally, HSE displayed slightly higher values of fatty acids than HTE. This can be related to the fact that, during hydrodistillation, lipids are neither entrained with the volatile terpenes nor transferred into the residual water.

Table 5

Quantification of fatty acid derivatives in the hemp flower extracts.

Sample HTE HSE HWE
Fatty acid wt.%
Myristic acid (C14:0) 0.09 ± 0.00 a 0.17 ± 0.01 b –
Palmitic acid (C16:0) 0.88 ± 0.03 a 0.86 ± 0.01 a 0.03 ± 0.01 b
Stearic acid (C18:0) 0.09 ± 0.00 a 0.10 ± 0.00 b –
Oleic acid (C18:1) 0.29 ± 0.01 a 0.36 ± 0.01 b –
Linoleic acid (C18:2) 1.52 ± 0.08 a 1.75 ± 0.07 b 0.03 ± 0.01 c
Linolenic acid (C18:3) 1.39 ± 0.08 a 1.26 ± 0.09 a 0.14 ± 0.00 b
Arachidic acid (C20:1) 0.58 ± 0.02 a 0.89 ± 0.03 b –
Behenic acid (C22:0) 0.13 ± 0.01 a 0.20 ± 0.02 b –

Data are expressed as mean ± SD of three repeated analyses; sample codes as in Table 1; different letters within rows indicate significant differences (p < 0.05).

To our knowledge, there are no previous data concerning the fatty acid composition of hemp flower extracts. However, there are numerous similarities with the composition of hemp seeds. Kriese et al. [] showed that linoleic acid (C18:2) and linolenic acid (C18:3) are the predominant fatty acids in the oils extracted from the seeds of 51 C. sativa genotypes. Their levels varied from 15.00–19.89 wt.% for linoleic acid and 5.15–8.24 wt.% for linolenic acid. Furthermore, numerous studies confirmed that linoleic acid (C18:2) is the major constituent of hempseed oils (up to 60% of the total fatty acids) [,,,].

2.5. Antimicrobial Activity of Hemp Essential Oil and Extracts

All obtained extracts were tested against a panel of human pathogens comprising nine Gram-positive bacteria, six Gram-negative bacteria, and five fungi (Table 6). Except for H. pylori (minimum inhibitory concentration, MIC ≤ 62.5 mg/L), the samples were inactive against the other Gram-negative bacteria. Nevertheless, most Gram-positive strains were sensitive to the treatment with the hemp extracts. The inactivity of hemp against most Gram-negative bacteria has already been proven by other authors []. According to the criteria proposed by Kuete and Efferth [], a sample is considered to have a significant antimicrobial activity if the MIC value is below 100 mg/L. Thus, HEO displayed the most potent antibacterial activity against S. aureus (MIC = 62.5 mg/L) and M. luteus (MIC = 15.6 mg/L); for the other strains, the MIC values were ≥125 mg/L. In general, the previous literature data also showed a modest activity of hemp EO. For instance, the MIC values ranged from 1200–4700 mg/L for a panel of bacteria comprising S. aureus, B. subtilis, M. luteus, E. coli, P. aeruginosa, and K. pneumoniae []. Similar values (MIC = 8000 mg/L) were also reported for hemp EO against different strains of S. aureus [].

Table 6

Antimicrobial activity of hemp essential oil and extracts.

Extract HEO HSE HTE HWE Antibiotics
Microorganism MIC [mg/L]
Gram-positive bacteria
Staphylococcus aureus 62.5 a 0.98 b 0.98 b 31.3 c 0.98 #
Staphylococcus aureus * 1000 a 3.9 b 3.9 b 125 c 0.98 #
Staphylococcus epidermidis 1000 a 3.9 b 3.9 b 125 c 0.12 #
Micrococcus luteus 15.6 a 1.95 b 3.9 c 62.5 d 1.95 #
Enterococcus faecalis 2000 a 7.8 b 7.8 b 250 c 0.24 #
Bacillus cereus 500 a 1.95 b 3.9 c 62.5 d 0.98 #
Streptococcus pneumoniae 125 a 31.3 b 62.5 c 62.5 c 0.24 #
Streptococcus pyogenes 250 a 31.3 b 62.5 c 1000 d 0.24 #
Streptococcus mutans 250 a 125 b 125 b 2000 c 0.98 #
Gram-negative bacteria
Helicobacter pylori 15.6 a 7.8 b 7.8 b 62.5 c 0.98 $
Salmonella Typhimurium >2000 >2000 >2000 >2000 0.06 §
Escherichia coli >2000 >2000 >2000 >2000 0.02 §
Proteus mirabilis >2000 >2000 >2000 >2000 0.03 §
Klebsiella pneumoniae >2000 >2000 >2000 >2000 0.12 §
Pseudomonas aeruginosa >2000 >2000 >2000 >2000 0.49 §
Yeasts
Candida albicans 1000 a 2000 b 250 c >2000 0.49 ß
Candida parapsilosis 500 a 2000 b 250 c 2000 b 0.24 ß
Candida glabrata 500 a >2000 250 b >2000 0.24 ß
Trichophyton rubrum 125 a 125 a 31.3 b 1000 c 0.0049 &
Trichophyton mentagrophytes 125 a 31.3 b 31.3 b 250 c 0.0012 &

# vancomycin; $ ofloxacin; § ciprofloxacin; ß nystatin; & terbinafine; sample codes as in Table 1; * methicillin-resistant strain; different letters within rows indicate significant differences (p < 0.05); MIC, minimum inhibitory concentration.

HTE showed the highest activity against S. aureus (MIC = 0.98 mg/L). For S. aureus MRSA, S. epidermidis, M. luteus, and B. cereus, the MIC values displayed by HTE were identical (3.9 mg/L). Candida species were not significantly inhibited; however, a strong anti-Trichophyton activity (MIC = 31.3 mg/L) was noticed for HTE. Similarly, HSE acted as a potent inhibitor against the growth of S. aureus (MIC = 0.98 mg/L), M. luteus (MIC = 1.95 mg/L), E. faecalis (MIC = 7.8 mg/L), and B. cereus (MIC = 1.95 mg/L), and T. mentagrophytes (MIC = 31.3 mg/L). The antimicrobial potential of HWE was better than HEO but considerably lower than that exhibited by HTE and HSE (Table 6). This behavior could be linked to the low cannabinoid concentration noticed in HWE compared to HTE and HSE (Table 4).

Our findings are in line with those observed by other authors. For instance, various hemp flower extracts displayed MIC values between 10 and 66 mg/L against E. coli, P. aeruginosa, B. subtilis, and S. aureus []. Muscara et al. [] reported MIC values of 39 mg/L against S. aureus. On the other hand, Serventi et al. [] documented for various hemp extracts a potent inhibitory activity against B. subtilis (MIC = 1.5–25 mg/L), S. aureus (MIC = 12.5–100 mg/L), P. aeruginosa (MIC = 25–100 mg/L), and E. coli (MIC = 6.2–12.5 mg/L); however, the inhibition of B. cereus and S. typhy was negligible (MIC > 200 mg/L). Furthermore, the same group of authors also presented the activity of hemp extracts against several dermatophyte strains, with MIC values ranging from 25 to 100 mg/L against T. mentagrophytes, T. tonsurans, and T. rubrum [].

In an attempt to link the antimicrobial activity of hemp flower extracts to the presence of cannabinoids, the effects of four previously isolated cannabinoids (i.e., CBD, CBG, CBN, and CBC) [] were subsequently evaluated against the same panel of microbial strains (Table 7). All tested cannabinoids were inactive against Gram-negative bacteria except for H. pylori (MIC ≤ 0.98 mg/L for CBG, CBD, and CBN). Furthermore, the four compounds showed no significant inhibitory activity against Candida spp. and Trichophyton spp. However, the MIC values against the Gram-positive strains indicated promising antibacterial activity, in particular against S. aureus, methicillin-resistant S. aureus (MRSA), S. epidermidis, M. luteus, E. faecalis, and B. cereus (MIC between 0.49 and 15.6 mg/mL). Overall, the following decreasing order of the inhibitory activity against Gram-positive bacteria could be proposed: CBD > CBN > CBG > CBC.

Table 7

Antimicrobial activity of selected cannabinoids.

Compound CBG CBD CBN CBC Antibiotics
Microorganism MIC [mg/L]
Gram-positive bacteria
Staphylococcus aureus 1.95 a 0.49 b 1.95 a 3.95 c 0.98 #
Staphylococcus aureus * 1.95 a 1.95 a 1.95 a 15.6 b 0.98 #
Staphylococcus epidermidis 1.95 a 1.95 a 1.95 a 1.95 a 0.12 #
Micrococcus luteus 1.95 a 0.98 b 0.98 b 0.98 b 1.95 #
Enterococcus faecalis 3.9 a 1.95 b 1.95 b 0.98 c 0.24 #
Bacillus cereus 1.95 a 0.98 b 1.95 a 7.8 c 0.98 #
Streptococcus pneumoniae 31.3 a 31.3 a 62.5 b 62.5 b 0.24 #
Streptococcus pyogenes 31.3 a 31.3 a 62.5 b 62.5 b 0.24 #
Streptococcus mutans 31.3 a 31.3 a 62.5 b 62.5 b 0.98 #
Gram-negative bacteria
Helicobacter pylori 0.49 a 0.98 b 0.98 b 15.6 c 0.98 $
Salmonella Typhimurium >2000 >2000 >2000 >2000 0.06 §
Escherichia coli >2000 >2000 >2000 >2000 0.02 §
Proteus mirabilis >2000 >2000 >2000 >2000 0.03 §
Klebsiella pneumoniae >2000 >2000 >2000 >2000 0.12 §
Pseudomonas aeruginosa >2000 >2000 >2000 >2000 0.49 §
Yeasts
Candida albicans 500 a 500 a 1000 b 500 a 0.49 ß
Candida parapsilosis 1000 a 1000 a 1000 a 500 b 0.24 ß
Candida glabrata 250 a 1000 b 1000 b 1000 b 0.24 ß
Trichophyton rubrum 1000 a 1000 a 1000 a 1000 a 0.0049 &
Trichophyton mentagrophytes 1000 a 1000 a 1000 a 1000 a 0.0012 &

# vancomycin; $ ofloxacin; § ciprofloxacin; ß nystatin; & terbinafine; * methicillin-resistant strain; different letters within rows indicate significant differences (p < 0.05); CBG, cannabigerol; CBD, cannabidiol; CBN, cannabinol; CBC, cannabichromene; MIC, minimum inhibitory concentration.

The evidence of antimicrobial activity for CBD has already been proven. For instance, MIC values of 1–4 mg/L were noticed against a diverse array of Gram-positive bacteria, including MRSA, MDR S. pneumoniae, E. faecalis, and anaerobic Clostridium difficile and Cutibacterium acnes []. CBD also showed different levels of antibacterial activity against Gram-positive bacteria, including susceptible and MDR strains (MIC = 2–4 mg/L for E. faecium, Enterococcus spp., Staphylococcus spp., M. luteus, and Rhodococcus equi. Furthermore, CBD displayed MIC values of 4–8 mg/L against MRSA, E. faecalis, and L. monocytogenes [].

The antimicrobial activity of other minor cannabinoids has been scarcely investigated. For instance, Appendino et al. [] showed that CBC, Δ9-THC, CBN, and CBG could exert antibacterial activity against various MDR S. aureus strains, with MIC values between 0.5 and 2 mg/L. In addition, the same cannabinoids also inhibited MRSA, Streptococcus mutans, Streptococcus sanguis, Streptococcus sobrinus, and Streptococcus salivarius with MIC below 5 mg/L []. Furthermore, S. aureus, S. epidermidis, and S. pyogenes were also shown to be impacted by CBG treatment (MIC = 10–75 μM) [,]. Nevertheless, the inhibitory effects of CBG, CBN, and CBC against other human pathogens are reported herein for the first time.

Concerning the possible mechanisms of antimicrobial activity of cannabinoids, it was previously shown that CBD, in combination with bacitracin, caused defects in cell division and irregularities in the cell envelope []. The treatment with CBG led to intracellular accumulation of membrane structures, induced membrane hyperpolarization, and decreased membrane fluidity of various bacterial strains []. The antibacterial activity of cannabinoids against MRSA was shown to be mediated through the inhibition of biofilm formation, the eradication of pre-formed biofilms and stationary phase cells persistent to antibiotics []. Furthermore, CBD proved a potent inhibitor of membrane vesicle release from E. coli, altering cell communication []. Nevertheless, the antimicrobial mechanisms of CBD and minor cannabinoids remain elusive, requiring subsequent investigations.

3. Materials and Methods

3.1. Materials

Alkane standard solution (C8–C20, ~40 mg/L each, in hexane), fatty acid methyl ester (FAME) mix (C8–C24), Mueller–Hinton (MH) broth, bisabolol (≥93%), caryophyllene (≥98%), myrcene (≥98%), linalool (≥99%), tridecanoic acid (≥98%), hydrochloric acid (≥37%), and glucose (≥99%) were acquired from Merck KGaA (Darmstadt, Germany). Hexane (≥95%), ethanol (≥99%), methanol (≥99%), acetonitrile (≥99%), and water (≥99%) were from VWR Chemicals (Ismaning, Germany). Caryophyllene oxide (≥95%) was bought from Thermo Scientific (Olching, Germany), whereas humulene (≥97%) was purchased from Biomol (Hamburg, Germany). The certified reference materials of 13 cannabinoids containing cannabidivarinic acid (CBDVA), cannabidivarin (CBDV), cannabigerolic acid (CBGA), cannabigerol (CBG), cannabidiol (CBD), tetrahydrocannabivarin (THCV), cannabinol (CBN), Δ9-tetrahydrocannabinol (Δ9-tTHC), Δ8-tetrahydrocannabinol (Δ8-THC), cannabicyclol (CBL), cannabichromene (CBC), and Δ9-tetrahydrocannabinolic acid (Δ9-THCA) was supplied from LGC Standards (Kielpin, Poland). The dried Cannabis sativa (hemp) flowers (cv. Futura 75) were provided by Hempartis GmbH (Malsch, Germany).

3.2. Preparation of Essential Oil and Solvent Extracts

The powdered hemp flowers (50 g) were subjected to hydrodistillation on a Clevenger-type apparatus with 500 mL water for 3 h. At the end of the hydrodistillation process, the amount of essential oil (HEO) was measured using the apparatus scale (in mL), collected, and dried over anhydrous sulfate. The water in the flask was filtered, and 250 mL were freeze-dried to afford the residual water extract (HWE). The solid plant material residue (spent hemp flowers) was dried in an oven at 40 °C for 48 h, and 7.5 g were extracted with hexane (75 mL) in an ultrasound bath for 30 min, for 3 repeated cycles, each time with the same volume of fresh solvent. After filtration, the solvent was evaporated under reduced pressure, yielding the spent extract (HSE). For comparison purposes, the unprocessed powdered hemp flowers were extracted with the same solvent under the same conditions, affording the total (unprocessed material) extract (HTE). For HEO, the yield was calculated with the following formula:

%yield=volumeoftheobtainedoil(mL)massofthehempflowers(g)×100

 

For the spent extract (HSE), the yield was determined as follows:

%yield=massoftheobtainedextractafterdrying(g)massofthespenthempflowers(g)×100

 

For the total extract (HTE), the yield was calculated with the formula:

%yield=massoftheobtainedextractafterdrying(g)massofthehempflowers(g)×100

 

For HWE, the yield was determined using the formula:

%yield=m1(g)m2(g)×V1(mL)V2(mL)×100

where 1 is the mass of the obtained water extract after freeze-drying, 2 is the mass of the hemp flowers, 1 is the volume of the water introduced in the hydrodistillation, and 2 is the volume of the freeze-dried water.

All extractions were performed in triplicate, with the extraction yields provided in Table 1.

3.3. Analytical Methods

 

3.3.1. Terpene Profile of Hemp Essential Oil (GC–MS)

The terpene profile of HEO was assessed by GC–MS performed on a TRACE GC Ultra instrument (Thermo Fischer, Waltham, MA, USA). The chromatographic separations were conducted on a Zebron ZB-5MS (30 m × 0.25 mm, 0.25 μm) column (Phenomenex, Torrance, CA, USA), with helium as the carrier gas at a flow rate of 1.43 mL/min. The injection temperature was 250 °C; 1 μL was injected with a split ratio of 50:1. The column temperature was initially held at 60 °C for 4 min, then increased to 280 °C at a rate of 10 °C/min, and maintained at 280 °C for 5 min. The MS parameters included: transfer line temperature, 320 °C; source temperature, 230 °C; ionization energy, 70 eV. The linear retention indices (LRI) were determined for all compounds in the chromatograms using a standard mixture of alkanes ranging from 8 to 20 carbon atoms. Peak identification was achieved by referencing the NIST 11 Mass Spectra Library and comparing the calculated LRI with those found in the relevant literature. All analyses were performed in triplicate.

 

3.3.2. Cannabinoid Profile and Composition

The cannabinoid profile of solvent extracts (HTE, HSE, and HWE) was assessed by LC–HRMS/MS. An Agilent 1200 HPLC (Agilent Technologies, PaloAlto, CA, USA), comprising an auto-sampler (G1329B), a binary pump (G1312C), and a column thermostat (G1316A), was used. The instrument was connected to an accurate-mass quadrupole time-of-flight (QTOF) MS/MS system from the Agilent 6530B series via a dual electrospray ionization (ESI) interface. The chromatographic separations were conducted on a Gemini C18 (100 mm × 2 mm, 3 μm) column (Phenomenex, Torrance, CA, USA) operated at 25 °C. The mobile phase comprised (A) water and (B) acetonitrile, both containing 0.1% formic acid. The phases were delivered at a flow rate of 0.2 mL/min, in the following gradient: 50–55% B from 0 to 12 min, 55–58% from 12 to 25 min, 58–75% B from 25 to 30 min, 75–90% B from 30 to 45 min, 90% B from 45 to 50 min. The sample injection volume was 10 μL. The detection was carried out in positive electrospray ionization mode, with the spectra recorded in the m/z 100–1000 Da range. The ion source parameters were as follows: drying gas (nitrogen) flow rate, 12 L/min; heated capillary temperature, 300 °C; nebulizer pressure, 35 psi; sheath gas temperature, 275 °C; sheath gas flow rate, 12 L/min; capillary voltage, 4000 V; nozzle voltage, 2000 V; fragmentor, 110 V; skimmer, 65 V; octupole radiofrequency peak voltage, 750 V. The MS/MS spectra were generated by automated fragmentation at a fixed collision energy of 30 V.

The cannabinoid concentration of solvent extracts (HTE, HSE, and HWE) was assessed by LC–DAD on a Shimadzu HPLC (Tokyo, Japan) containing a binary pump (LC-20AD), autosampler (SIL-20A), degasser (DGU-20A), and UV/VIS detector (SPD-M20A). The chromatographic separations were conducted on a Zorbax XDB-C18 (150 mm × 4.6 mm, 3.5 μm) column (Agilent Technologies, Palo Alto, CA, USA) at 30 °C. The mobile phase comprised (A) water and (B) acetonitrile, both containing 0.1% formic acid. The phases were delivered at a flow rate of 1.5 mL/min in the following gradient: 72% B for 4 min, 75–80% B from 4.01 to 11 min, and 90% B from 11.01 to 12 min. The sample injection volume was 10 μL, with the chromatograms recorded at 228 nm. The concentrations of cannabinoids were assessed using the calibration curves of the corresponding standards. All analyses were performed in triplicate.

 

3.3.3. Fatty Acid Composition of Hemp Extracts (GC–MS)

The fatty acid composition of solvent extracts (HTE, HSE, and HWE) was assessed by GC–MS on an Agilent 6890 GC (Agilent Technologies, PaloAlto, CA, USA) coupled to a mass selective detector (MSD). The chromatographic separations were conducted on a Zebron Rtx-Wax (30 m × 0.25 mm, 0.25 μm) column (Restek, Centre County, PA, USA), with helium as the carrier gas at a flow rate of 1 mL/min. The injection temperature was 200 °C; 1 μL was injected with a split ratio of 7.5:1. The column temperature was initially held at 80 °C for 2 min, then increased to 180 °C at a rate of 7 °C/min, maintained at 180 °C for 10 min; then ramped up to 230 °C at a rate of 1 °C/min, and finally held at 230 °C for 10 min. The MS parameters included: transfer line temperature, 230 °C; source temperature, 230 °C; ionization energy, 70 eV. Before analyses, the samples (~20 mg) were dissolved in 1 mL hexane. Then, 0.2 mL of the obtained solutions were incubated at 90 °C for 1 h in the presence of 6 mL of methanol/hydrochloric acid (11:1, v/v) and 0.1 mL tridecanoic acid (1 mg/mL in hexane) as internal standard. Next, 1.7 mL hexane and 2 mL water were added; after shaking and phase separation, 1 mL of the upper phase was analyzed by GC–MS. The fatty acid content in the samples was expressed based on a calibration curve performed with the FAME mixture. All analyses were performed in triplicate.

3.4. Antimicrobial Assays

The antimicrobial assays were performed using the microdilution method, according to the European Committee on Antimicrobial Susceptibility Testing [,]. The antimicrobial activity was evaluated against Gram-positive bacteria (Staphylococcus aureus ATCC 25923, Staphylococcus aureus ATCC BAA-1707, Staphylococcus epidermidis ATCC 12228, Micrococcus luteus ATCC 10240, Enterococcus faecalis ATCC 29212, Bacillus cereus ATCC 10876, Streptococcus pneumoniae ATCC 49619, Streptococcus pyogenes ATCC 19615, Streptococcus mutans ATCC 25175), Gram-negative bacteria (Helicobacter pylori ATCC 43504, Salmonella Typhimurium ATCC 14028, Escherichia coli ATCC 25922, Proteus mirabilis ATCC 12453, Klebsiella pneumoniae ATCC 13883, Pseudomonas aeruginosa ATCC 9027), and fungi (Candida albicans ATCC 102231, Candida parapsilosis ATCC 22019, Candida glabrata ATCC 2091, Trichophyton rubrum ATCC 28188, Trichophyton mentagrophytes ATCC 9533). Serial double dilutions of samples were prepared in MH broth or RPMI 1640 medium 2% glucose buffered with 0.165 M MOPS and supplemented with chloramphenicol 50 mg/L and cycloheximide 300 mg/L, for non-fastidious bacteria and fungi, respectively. The sterile 96-well flat-bottom polystyrene microtitrate plates (Nunc, Denmark) were prepared by dispensing 100 µL of the appropriate dilution of the tested extracts in broth medium per well by serial two-fold dilutions, to obtain the final concentrations of the tested extracts ranging from 2000 to 0.25 mg/L for bacteria and yeasts. The inocula were prepared with fresh microbial cultures in sterile 0.85% NaCl to match the turbidity of 0.5 McFarland standard, and were added to wells to obtain the final density of 5 × 105 colony forming units (CFU)/mL for bacteria, 5 × 104 CFU/mL for yeasts and 5 × 105 CFU/mL for dermatophytes. After incubation (non-fastidious bacteria and yeasts—35 °C for 24 h and dermatophytes—28 °C for 5 days), the growth of microorganisms was measured spectrophotometrically at 600 nm (BioTEK ELx808, BioTek Instruments, Inc., Winooski, VT, USA). The minimum inhibitory concentration (MIC) for H. pylori ATCC 43504 was determined using a two-fold microdilution method in MH broth with 7% of lysed horse blood at an extract concentration ranging from 2000 to 0.25 mg/L with a H. pylori suspension of 3 McFarland standard diluted 100 times (9 × 106 CFU/mL). After incubation at 35 °C for 72 h under microaerophilic conditions (5% O2, 15% CO2, and 80% N2), the growth of H. pylori was visualized with the addition of 10 µL of 0.04% resazurin. The MIC endpoint was recorded after 4 h incubation as the lowest concentration of extract that completely inhibits bacterial growth. An appropriate DMSO control (at a final concentration of 10%), a positive control (containing inoculum without the tested extracts), and a negative control (containing the tested extracts without inoculum) were included on each microplate. The MIC was determined and reported for each sample and strain. Vancomycin, ciprofloxacin, ofloxacin, and nystatin/terbinafine were used as the standard reference drugs. All experiments were performed in triplicate.

3.5. Statistical Analysis

Data are provided as mean ± standard deviation of three repeated experiments; ANOVA with Tukey’s post hoc test was conducted; p < 0.05 was considered statistically significant.

4. Conclusions

The seminal findings provided by the phytochemical analysis are as follows: (i) 15 monoterpenes and 36 sesquiterpenes were identified in the EO, with sesquiterpenes accounting for ~85% of total peak area; (ii) a total of 7 acidic cannabinoids and 14 neutral derivatives were annotated in the post-distillation by-products, with CBD as the dominant compound (up to 16 wt.%); (iii) linoleic and linolenic acid were the representative fatty acids in the solvent extracts (up to 2 wt.%); (iv) the spent extracts displayed cannabinoid levels around 2–3 times higher than the unprocessed flower solvent extracts. Concerning the biological study, the hemp EO and extracts demonstrated potent antimicrobial activity (MIC < 62.5 mg/L) against Gram-positive bacteria (e.g., S. aureus, S. epidermidis, M. luteus, E. faecalis, B. cereus, S. pneumoniae), H. pylori, and Trichophyton spp. In addition, when CBD, CBG, CBN, and CBC were individually tested against the same panel of microorganisms, MIC values ranging from 0.49 and 15.6 mg/mL against Gram-positive bacteria were retrieved. The inhibitory activity generally decreased in the following order: CBD > CBN > CBG > CBC. For some cannabinoids, the antimicrobial properties against certain microbial strains were proven for the first time in the current study.

Considering that the hemp flower essential oil industry generates significant amounts of unused biomass rich in cannabinoids, the strategy implemented in the current work could afford high-added-value by-products within the hemp production chain, contributing to the principles of the circular economy and sustainability. Altogether, this work can open promising avenues for utilizing cannabinoid-rich materials obtained during hemp flower processing in functional foods or cosmeceutical and pharmaceutical products with antimicrobial properties.

Acknowledgments

The authors would like to thank Hempartis GmbH (Malsch, Germany) for providing the hemp materials.

Funding Statement

This research received no external funding.

Author Contributions

Conceptualization, S.V.L.; methodology, S.V.L., K.W., I.K.-G. and A.T.; software, S.V.L., K.W. and I.K.-G.; validation, S.V.L. and A.T.; formal analysis, S.V.L.; investigation, S.V.L., K.W. and I.K.-G.; resources, S.V.L., K.S.-W. and M.M.; data curation, S.V.L.; writing—original draft preparation, S.V.L.; writing—review and editing, K.W., I.K.-G., K.S.-W., M.M. and A.T.; visualization, S.V.L.; supervision, S.V.L.; project administration, S.V.L.; funding acquisition, K.S.-W. and M.M. All authors have read and agreed to the published version of the manuscript.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Data are contained within the article.

Conflicts of Interest

The authors declare no conflicts of interest.

Footnotes

Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

 

References

1. Luca S.V., Roehrer S., Kleigrewe K., Minceva M. Approach for simultaneous cannabidiol isolation and pesticide removal from hemp extracts with liquid-liquid chromatography. Ind. Crop. Prod. 2020;155:112726. doi: 10.1016/j.indcrop.2020.112726. [CrossRef] []
2. Moscariello C., Matassa S., Esposito G., Papirio S. From residue to resource: The multifaceted environmental and bioeconomy potential of industrial hemp (Cannabis sativa L.) Resour. Conserv. Recycl. 2021;175:105864. doi: 10.1016/j.resconrec.2021.105864. [CrossRef] []
3. Benelli G., Pavela R., Lupidi G., Nabissi M., Petrelli R., Ngahang Kamte S.L., Cappellacci L., Fiorini D., Sut S., Dall’Acqua S. The crop-residue of fiber hemp cv. Futura 75: From a waste product to a source of botanical insecticides. Environ. Sci. Pollut. Res. 2018;25:10515–10525. doi: 10.1007/s11356-017-0635-5. [PubMed] [CrossRef] []
4. Serventi L., Flores G.A., Cusumano G., Barbaro D., Tirillini B., Venanzoni R., Angelini P., Acquaviva A., Di Simone S.C., Orlando G. Comparative investigation of antimicrobial and antioxidant effects of the extracts from the inflorescences and leaves of the Cannabis sativa L. cv. strawberry. Antioxidants. 2023;12:219. doi: 10.3390/antiox12020219. [PMC free article] [PubMed] [CrossRef] []
5. Appendino G., Gibbons S., Giana A., Pagani A., Grassi G., Stavri M., Smith E., Rahman M.M. Antibacterial cannabinoids from Cannabis sativa: A structure− activity study. J. Nat. Prod. 2008;71:1427–1430. doi: 10.1021/np8002673. [PubMed] [CrossRef] []
6. Russo E.B., Marcu J. Cannabis pharmacology: The usual suspects and a few promising leads. Adv. Pharmacol. 2017;80:67–134. [PubMed] []
7. Alhadid A., Luca S.V., Nasrallah S., Minceva M. Experimental investigation and thermodynamic modeling of cannabidiol solubility in plant oils and hydrophobic eutectic systems. J. Mol. Liq. 2023;372:121172. doi: 10.1016/j.molliq.2022.121172. [CrossRef] []
8. Dos Santos R.G., Hallak J.E., Crippa J.A.S. Cannabinoids and Neuropsychiatric Disorders. Springer; Berlin/Heidelberg, Germany: 2021. Neuropharmacological effects of the main phytocannabinoids: A narrative review; pp. 29–45. [PubMed] []
9. Russo C., Lavorgna M., Nugnes R., Orlo E., Isidori M. Comparative assessment of antimicrobial, antiradical and cytotoxic activities of cannabidiol and its propyl analogue cannabidivarin. Sci. Rep. 2021;11:22494. doi: 10.1038/s41598-021-01975-z. [PMC free article] [PubMed] [CrossRef] []
10. Agrawal A., Gupta A. A review on exploring the antibacterial activity of cannabinoids with respect to biofilm formation. J. Integr. Health Sci. 2020;8:101–104. []
11. Gaweł-Bęben K., Czech K., Luca S.V. Cannabidiol and minor phytocannabinoids: A preliminary study to assess their anti-melanoma, anti-melanogenic, and anti-tyrosinase properties. Pharmaceuticals. 2023;16:648. doi: 10.3390/ph16050648. [PMC free article] [PubMed] [CrossRef] []
12. Iseppi R., Brighenti V., Licata M., Lambertini A., Sabia C., Messi P., Pellati F., Benvenuti S. Chemical characterization and evaluation of the antibacterial activity of essential oils from fibre-type Cannabis sativa L. (Hemp) Molecules. 2019;24:2302. doi: 10.3390/molecules24122302. [PMC free article] [PubMed] [CrossRef] []
13. Fiorini D., Scortichini S., Bonacucina G., Greco N.G., Mazzara E., Petrelli R., Torresi J., Maggi F., Cespi M. Cannabidiol-enriched hemp essential oil obtained by an optimized microwave-assisted extraction using a central composite design. Ind. Crop. Prod. 2020;154:112688. doi: 10.1016/j.indcrop.2020.112688. [CrossRef] []
14. Micalizzi G., Vento F., Alibrando F., Donnarumma D., Dugo P., Mondello L. Cannabis Sativa L.: A comprehensive review on the analytical methodologies for cannabinoids and terpenes characterization. J. Chromatogr. A. 2020;1637:461864. doi: 10.1016/j.chroma.2020.461864. [PubMed] [CrossRef] []
15. Eschlwech F., Ruedenauer F., Leonhardt S.D., Minceva M., Luca S.V. Liquid-liquid chromatography separation of hemp terpenes with repellent properties against Hyalomma marginatum: A multi-methodological approach. Ind. Crop. Prod. 2023;197:116562. doi: 10.1016/j.indcrop.2023.116562. [CrossRef] []
16. Benelli G., Pavela R., Petrelli R., Cappellacci L., Santini G., Fiorini D., Sut S., Dall’Acqua S., Canale A., Maggi F. The essential oil from industrial hemp (Cannabis sativa L.) by-products as an effective tool for insect pest management in organic crops. Ind. Crop. Prod. 2018;122:308–315. doi: 10.1016/j.indcrop.2018.05.032. [CrossRef] []
17. Luca S.V., Zengin G., Sinan K.I., Skalicka-Woźniak K., Trifan A. Post-distillation by-products of aromatic plants from Lamiaceae family as rich sources of antioxidants and enzyme inhibitors. Antioxidants. 2023;12:210. doi: 10.3390/antiox12010210. [PMC free article] [PubMed] [CrossRef] []
18. Schofs L., Sparo M.D., Sanchez Bruni S.F. The antimicrobial effect behind Cannabis sativa. Pharmacol. Res. Perspect. 2021;9:e00761. doi: 10.1002/prp2.761. [PMC free article] [PubMed] [CrossRef] []
19. Hong H., Sloan L., Saxena D., Scott D.A. The antimicrobial properties of cannabis and cannabis-derived compounds and relevance to CB2-targeted neurodegenerative therapeutics. Biomedicines. 2022;10:1959. doi: 10.3390/biomedicines10081959. [PMC free article] [PubMed] [CrossRef] []
20. Scott C., Neira Agonh D., Lehmann C. Antibacterial effects of phytocannabinoids. Life. 2022;12:1394. doi: 10.3390/life12091394. [PMC free article] [PubMed] [CrossRef] []
21. Fathordoobady F., Singh A., Kitts D.D., Pratap Singh A. Hemp (Cannabis sativa L.) extract: Anti-microbial properties, methods of extraction, and potential oral delivery. Food Rev. Int. 2019;35:664–684. doi: 10.1080/87559129.2019.1600539. [CrossRef] []
22. Gabarin A., Yarmolinsky L., Budovsky A., Khalfin B., Ben-Shabat S. Cannabis as a source of approved drugs: A new look at an old problem. Molecules. 2023;28:7686. doi: 10.3390/molecules28237686. [PMC free article] [PubMed] [CrossRef] []
23. Karas J.A., Wong L.J., Paulin O.K., Mazeh A.C., Hussein M.H., Li J., Velkov T. The antimicrobial activity of cannabinoids. Antibiotics. 2020;9:406. doi: 10.3390/antibiotics9070406. [PMC free article] [PubMed] [CrossRef] []
24. Kumar P., Mahato D.K., Kamle M., Borah R., Sharma B., Pandhi S., Tripathi V., Yadav H.S., Devi S., Patil U. Pharmacological properties, therapeutic potential, and legal status of Cannabis sativa L.: An overview. Phytother. Res. 2021;35:6010–6029. doi: 10.1002/ptr.7213. [PubMed] [CrossRef] []
25. Luca S.V., Kittl T., Minceva M. Supercritical CO2 extraction of hemp flowers: A systematic study to produce terpene-rich and terpene-depleted cannabidiol fractions. Ind. Crop. Prod. 2022;187:115395. doi: 10.1016/j.indcrop.2022.115395. [CrossRef] []
26. Pieracci Y., Ascrizzi R., Terreni V., Pistelli L., Flamini G., Bassolino L., Fulvio F., Montanari M., Paris R. Essential oil of Cannabis sativa L: Comparison of yield and chemical composition of 11 hemp genotypes. Molecules. 2021;26:4080. doi: 10.3390/molecules26134080. [PMC free article] [PubMed] [CrossRef] []
27. Menghini L., Ferrante C., Carradori S., D’Antonio M., Orlando G., Cairone F., Cesa S., Filippi A., Fraschetti C., Zengin G. Chemical and bioinformatics analyses of the anti-leishmanial and anti-oxidant activities of hemp essential oil. Biomolecules. 2021;11:272. doi: 10.3390/biom11020272. [PMC free article] [PubMed] [CrossRef] []
28. Zheljazkov V.D., Sikora V., Dincheva I., Kačániová M., Astatkie T., Semerdjieva I.B., Latkovic D. Industrial, CBD, and wild hemp: How different are their essential oil profile and antimicrobial activity? Molecules. 2020;25:4631. doi: 10.3390/molecules25204631. [PMC free article] [PubMed] [CrossRef] []
29. Berman P., Futoran K., Lewitus G.M., Mukha D., Benami M., Shlomi T., Meiri D. A new ESI-LC/MS approach for comprehensive metabolic profiling of phytocannabinoids in Cannabis. Sci. Rep. 2018;8:14280. doi: 10.1038/s41598-018-32651-4. [PMC free article] [PubMed] [CrossRef] []
30. Borille B.T., Ortiz R.S., Mariotti K.C., Vanini G., Tose L.V., Filgueiras P.R., Marcelo M.C., Ferrão M.F., Anzanello M.J., Limberger R.P. Chemical profiling and classification of cannabis through electrospray ionization coupled to Fourier transform ion cyclotron resonance mass spectrometry and chemometrics. Anal. Methods. 2017;9:4070–4081. doi: 10.1039/C7AY01294B. [CrossRef] []
31. Barhdadi S., Courselle P., Deconinck E., Vanhee C. The analysis of cannabinoids in e-cigarette liquids using LC-HRAM-MS and LC-UV. J. Pharm. Biomed. Anal. 2023;230:115394. doi: 10.1016/j.jpba.2023.115394. [PubMed] [CrossRef] []
32. Piccolella S., Formato M., Pecoraro M.T., Crescente G., Pacifico S. Discrimination of CBD-, THC-and CBC-type acid cannabinoids through diagnostic ions by UHPLC-HR-MS/MS in negative ion mode. J. Pharm. Biomed. Anal. 2021;201:114125. doi: 10.1016/j.jpba.2021.114125. [PubMed] [CrossRef] []
33. Motiejauskaitė D., Ullah S., Kundrotaitė A., Žvirdauskienė R., Bakšinskaitė A., Barčauskaitė K. Isolation of biologically active compounds from Cannabis sativa L. inflorescences by using different extraction solvents and evaluation of antimicrobial activity. Antioxidants. 2023;12:998. doi: 10.3390/antiox12050998. [PMC free article] [PubMed] [CrossRef] []
34. Muscarà C., Smeriglio A., Trombetta D., Mandalari G., La Camera E., Grassi G., Circosta C. Phytochemical characterization and biological properties of two standardized extracts from a non-psychotropic Cannabis sativa L. cannabidiol (CBD)-chemotype. Phytother. Res. 2021;35:5269–5281. doi: 10.1002/ptr.7201. [PMC free article] [PubMed] [CrossRef] []
35. Kriese U., Schumann E., Weber W., Beyer M., Brühl L., Matthäus Oil content, tocopherol composition and fatty acid patterns of the seeds of 51 Cannabis sativa L. genotypes. Euphytica. 2004;137:339–351. doi: 10.1023/B:EUPH.0000040473.23941.76. [CrossRef] []
36. Aiello A., Pizzolongo F., Scognamiglio G., Romano A., Masi P., Romano R. Effects of supercritical and liquid carbon dioxide extraction on hemp (Cannabis sativa L.) seed oil. Int. J. Food Sci. Technol. 2020;55:2472–2480. doi: 10.1111/ijfs.14498. [CrossRef] []
37. Petrović M., Debeljak Ž., Kezić N., Džidara P. Relationship between cannabinoids content and composition of fatty acids in hempseed oils. Food Chem. 2015;170:218–225. doi: 10.1016/j.foodchem.2014.08.039. [PubMed] [CrossRef] []
38. Da Porto C., Decorti D., Tubaro F. Fatty acid composition and oxidation stability of hemp (Cannabis sativa L.) seed oil extracted by supercritical carbon dioxide. Ind. Crop. Prod. 2012;36:401–404. doi: 10.1016/j.indcrop.2011.09.015. [CrossRef] []
39. Da Porto C., Voinovich D., Decorti D., Natolino A. Response surface optimization of hemp seed (Cannabis sativa L.) oil yield and oxidation stability by supercritical carbon dioxide extraction. J. Supercrit. Fluids. 2012;68:45–51. doi: 10.1016/j.supflu.2012.04.008. [CrossRef] []
40. Kuete V., Efferth T. Cameroonian medicinal plants: Pharmacology and derived natural products. Front. Pharmacol. 2010;1:123. doi: 10.3389/fphar.2010.00123. [PMC free article] [PubMed] [CrossRef] []
41. Nafis A., Kasrati A., Jamali C.A., Mezrioui N., Setzer W., Abbad A., Hassani L. Antioxidant activity and evidence for synergism of Cannabis sativa (L.) essential oil with antimicrobial standards. Ind. Crop. Prod. 2019;137:396–400. doi: 10.1016/j.indcrop.2019.05.032. [CrossRef] []
42. Zengin G., Menghini L., Di Sotto A., Mancinelli R., Sisto F., Carradori S., Cesa S., Fraschetti C., Filippi A., Angiolella L. Chromatographic analyses, in vitro biological activities, and cytotoxicity of Cannabis sativa L. essential oil: A multidisciplinary study. Molecules. 2018;23:3266. doi: 10.3390/molecules23123266. [PMC free article] [PubMed] [CrossRef] []
43. Jokić S., Jerković I., Pavić V., Aladić K., Molnar M., Kovač M.J., Vladimir-Knežević S. Terpenes and cannabinoids in supercritical CO2 extracts of industrial hemp inflorescences: Optimization of extraction, antiradical and antibacterial activity. Pharmaceuticals. 2022;15:1117. doi: 10.3390/ph15091117. [PMC free article] [PubMed] [CrossRef] []
44. Luca S.V., Braumann L., Gerigk M., Frank O., Minceva M. Separation of minor cannabinoids from hemp extract with trapping multiple dual mode liquid-liquid chromatography. J. Chromatogr. A. 2021;1658:462608. doi: 10.1016/j.chroma.2021.462608. [PubMed] [CrossRef] []
45. Blaskovich M.A., Kavanagh A.M., Elliott A.G., Zhang B., Ramu S., Amado M., Lowe G.J., Hinton A.O., Pham D.M.T., Zuegg J. The antimicrobial potential of cannabidiol. Commun. Biol. 2021;4:7. doi: 10.1038/s42003-020-01530-y. [PMC free article] [PubMed] [CrossRef] []
46. Wassmann C.S., Højrup P., Klitgaard J.K. Cannabidiol is an effective helper compound in combination with bacitracin to kill Gram-positive bacteria. Sci. Rep. 2020;10:4112. doi: 10.1038/s41598-020-60952-0. [PMC free article] [PubMed] [CrossRef] []
47. Farha M.A., El-Halfawy O.M., Gale R.T., MacNair C.R., Carfrae L.A., Zhang X., Jentsch N.G., Magolan J., Brown E.D. Uncovering the hidden antibiotic potential of cannabis. ACS Infect. Dis. 2020;6:338–346. doi: 10.1021/acsinfecdis.9b00419. [PubMed] [CrossRef] []
48. Aqawi M., Sionov R.V., Gallily R., Friedman M., Steinberg D. Anti-bacterial properties of cannabigerol toward Streptococcus mutans. Front. Microbiol. 2021;12:656471. doi: 10.3389/fmicb.2021.656471. [PMC free article] [PubMed] [CrossRef] []
49. Luz-Veiga M., Amorim M., Pinto-Ribeiro I., Oliveira A.L., Silva S., Pimentel L.L., Rodríguez-Alcalá L.M., Madureira R., Pintado M., Azevedo-Silva J. Cannabidiol and cannabigerol exert antimicrobial activity without compromising skin microbiota. Int. J. Mol. Sci. 2023;24:2389. doi: 10.3390/ijms24032389. [PMC free article] [PubMed] [CrossRef] []
50. Kosgodage U.S., Matewele P., Awamaria B., Kraev I., Warde P., Mastroianni G., Nunn A.V., Guy G.W., Bell J.D., Inal J.M. Cannabidiol is a novel modulator of bacterial membrane vesicles. Front. Cell. Infect. Microbiol. 2019;9:324. doi: 10.3389/fcimb.2019.00324. [PMC free article] [PubMed] [CrossRef] []
51. Arendrup M.C., Kahlmeter G., Guinea J., Meletiadis J., the Subcommittee on Antifungal Susceptibility Testing (AFST) of the ESCMID European Committee for Antimicrobial Susceptibility Testing (EUCAST) How to: Perform antifungal susceptibility testing of microconidia-forming dermatophytes following the new reference EUCAST method E. Def 11.0, exemplified by Trichophyton. Clin. Microbiol. Infect. 2021;27:55–60. doi: 10.1016/j.cmi.2020.08.042. [PubMed] [CrossRef] []
52. European Committee for Antimicrobial Susceptibility Testing (EUCAST) of the European Society of Clinical Microbiology and Infectious Diseases (ESCMID) Determination of minimum inhibitory concentrations (MICs) of antibacterial agents by broth dilution. Clin. Microbiol. Infect. 2003;9 [PubMed] []
Articles from Antibiotics are provided here courtesy of Multidisciplinary Digital Publishing Institute (MDPI)

Leave a Reply